How to Install a Keyless Entry Fob with LCD Smart Car Key

iSun

·July 30, 2024

·7 min read

How to Install a Keyless Entry Fob with LCD Smart Car Key

Keyless entry fobs and LCD smart car keys revolutionise how we access cars. These tools make things easier and safer. A keyless entry fob allows you to lock and unlock your car from a distance. An LCD smart car key displays car information on a screen. Using a keyless system enhances car security and functionality. Newer cars utilise this technology to meet needs and prevent more thefts.

Getting Ready

Collecting Tools and Materials

First, get all the tools and materials you need. Being ready makes things easier.

Tools You Need

You will need these tools:

Wire cutter and stripper
Electrical tape
Clamps and harnesses
Soldering iron
Key fob programmer
Diagnostic scanner
Flathead and Phillips screwdrivers
Pliers

Materials You Need

Also, gather these materials:

New keyless entry fob
LCD smart car key
Replacement batteries
Cleaning cloth
Marking pen

Taking Out Old Parts

Remove old parts before adding new ones. This is important for a good upgrade.

Removing the Old Key Fob

Find the old key fob first. Use a screwdriver to take out screws holding it. Pull out the old key fob gently. Throw away the old key fob properly.

Disconnecting the Battery

Next, disconnect the car battery to stay safe from electrical shocks. Use pliers to loosen battery terminals. Remove the negative terminal first, then the positive one. Keep the battery disconnected until you're done.

Measurements and Fitting

Measuring for Proper Fit

Measuring the Key Fob Slot

Measure the key fob slot carefully. Use a ruler or tape. Make sure the new key fob fits. Wrong measurements can cause problems. Correct measurements make installation easy.

Ensuring Compatibility with the Car Model

Check if the new key fob fits your car model. Look at the car's manual or ask the maker. Right fit ensures it works well. Wrong fit can cause issues. Always check before you start.

Preparing the Installation Area

Cleaning the Installation Area

Clean where you will install parts well. Use a cloth to wipe dust away. A clean spot helps parts fit right. Dirt can mess up installation. Clean areas make better installs.

Marking the Installation Points

Mark where things go clearly. Use a pen to mark spots exactly. Good marks help during installation. Bad marks can cause wrong fitting. Proper marks make installing easier.

Installing the New Components

Installing the Keyless Entry Fob

Inserting the Key Fob into the Slot

Begin by inserting the new keyless entry fob into the designated slot. Align the key fob with the slot carefully. Ensure that the key fob slides in smoothly. A proper fit will prevent any future issues. Double-check the alignment before proceeding.

Securing the Key Fob in Place

Once the key fob is in the slot, secure it firmly. Use screws or clamps to hold the key fob in place. Tighten the screws with a screwdriver. Make sure the key fob does not move or wiggle. A stable key fob ensures reliable performance.

Installing the LCD Smart Car Key

Connecting the LCD Screen

Next, connect the LCD screen of the smart car key. Locate the connection port on the car's dashboard. Plug the LCD screen into the port. Ensure a snug fit to avoid loose connections. A secure connection guarantees the LCD smart car key functions correctly.

Securing the LCD Screen in Place

Finally, secure the LCD screen in its designated spot. Use screws or adhesive strips to hold the screen. Make sure the screen is level and straight. Tighten all screws to prevent any movement. A well-secured LCD screen will display car information clearly and accurately.

Programming the Entry Code

Setting Up the Keyless Entry System

Accessing the Programming Mode

First, get into programming mode. Check your car's manual for steps. Usually, you press some buttons on the dashboard. Make sure the car is in "Park" and off. Follow each step to avoid mistakes.

Entering the New Entry Code

Next, put in the new entry code. Use the keypad on the key fob. Pick a code that's easy to remember but hard to guess. Confirm it by pressing a button. The system will beep or light up to show it's set.

Testing the Entry Code

Verifying the Code Works

Check if the new code works. Stand near your car and use the key fob to lock and unlock it. Make sure it responds right away. Do this a few times to be sure.

Troubleshooting Common Issues

If it doesn't work, fix common problems. Look at your car's manual for help tips. Make sure your key fob has new batteries. Try programming again if needed. If it still fails, ask a professional for help.

Expert Testimony:
Auto Car Locksmith Sydney installs keyless features with programmed keys. For tough programming jobs, get help from a skilled locksmith or dealership. They have special tools and know-how to program your key fob right.

Programming the entry code well makes sure your keyless system works great. Good programming boosts car safety and ease of use.

Testing Phase

Final Checks

Ensuring All Components are Secure

Check that all parts are tight. Look at the keyless entry fob and the LCD smart car key. Make sure screws and clamps hold them well. Loose parts can break things. Tighten any loose screws with a screwdriver. Check that battery connections are firm. A secure setup works better.

Testing the Keyless Entry Fob

Try out the keyless entry fob. Stand by your car and press lock. See if it locks right away. Press unlock and see if it opens. Do this a few times to be sure it works well. If it doesn't work, check the battery and connections again.

Testing the LCD Smart Car Key

Verifying the LCD Screen Functions

Look at the LCD screen of the smart car key. Turn on your car and watch the screen. Make sure it shows clear information about your car. Check for flickering or blank screens. A good screen helps you drive better. If it doesn’t work, check its connection port.

Ensuring the Car Responds Correctly

Make sure your car responds to the LCD smart car key right away. Start your car using this key and see if it starts smoothly. Watch if the screen updates with real-time info about your car. Test other functions like opening the trunk or turning on lights to confirm everything works well.

Expert Testimony:
Auto Car Locksmith Sydney says, "This chip will fix security issues every time."

A good test keeps things safe and easy to use. Enjoy your new keyless system! Regular checks keep it working great.

You have put in your new keyless entry fob and LCD smart car key. Regular check-ups keep the system working well. Look for loose parts and change batteries when needed.

Enjoy how easy your new keyless entry system is. Think about walking to your car and it unlocks by itself. This upgrade makes your car safer and easier to use.

Feel free to leave comments or ask questions. Your feedback helps make future guides better.